25
ACCESSING THE FUEL BED
The decorative finishing trim, glass,media will need to be removed in
order to do any maintenance inside of the appliance.
THIS APPLIANCE MUST ONLY BE SERVICED BY A SUITABLY
QUALIFIED PERSON. BEFORE UNDERTAKING ANY WORK
ON THE APPLIANCE: SWITCH OFF THE APPLIANCE AND
ISOLATE THE POWER SUPPLY ENSURING THERE IS NO
POWER TO THE APPLIANCE. Wait for at least 10 minutes until
the appliance has cooled down.
REMOVING THE FUEL BED
1
2
3
MAINTENANCE
4
3
2
1
To Next Page
Loading...
