9
Getting started
Settings required for the first start of the device
lasts: 1s
Start
basis: PH
basis : 7.4
basis : 50
basis : --
6.8 to 7.8
pH minus or pH plus
clic
clic
clic
Long
Ajuster
standard (7.0)
clic
Long
Countdown
clic
Long
pH flashes
Adjust
from 0 to 999m3
example : 75
clic
Long
clic
Choose
clic
clic
Long
Countdown
clic
Software version
The pH function is already selected.
No need to change the Fct.
Calibration
Volume of the pool
Injection of pH plus or pH minus
Setpoint
For one second all lights of the display are on.
For one second the software version is displayed
Then a countdown of 60 seconds starts,
during which it is possible to modify the following options.
Get started at the end of the countdown
pH flashes
Function pH
Adjust
pH flashes
pH flashes
To Next Page
Loading...
Need help?
General