29
4 TRANSPORTATION, STORAGE
AND RECYCLING
4.1 Transportation
4.1.1 The reader is transported in
the manufacturer’s packaging by any covered
vehicles to any distance provided that transportation
rules for this specic mode of transport are
observed. In case the device is transported by air,
it must be kept in hermetically sealed and heated
compartments. Fasten the packed device to avoid
its displacement. The requirements of shipping
marks applied on the packaging must be strictly
observed during device transportation.
4.1.2 If the device is used before transportation,
it must be packed in compliance with paragraph 1.6
of this Guide.
4.2 Storage
4.2.1 The device should be stored in
the manufacturer’s packaging on shelves in heated
rooms with the air temperature of +5…40 °С and
relative air humidity of maximum 80 % provided
that the re safety rules are observed. The distance
between walls, oor and the device should not be
less than 0.1 m. The distance between heating
equipment and the device should not be less than
0.5 m. The air in storage premises must not contain
corrosive substances (acid and alkali fumes) which
can damage the device.
4.2.2 Storage warranty period makes 6 months
from the date of production.
To Next Page
Loading...