REGULA 7027F - 1 Description and Operation; Reader Function

8
testing the above mentioned functions. The test
application is supplied as a part of SDK.
The customer is responsible for developing
the User’s application and organizing its interaction
with SDK components and reader hardware. These
procedures are not described in the Guide.
1 DESCRIPTION AND OPERATION
1.1 Reader function
The reader is a multipurpose product which is
intended for capturing document images of ID, ID2 or
ID3 formats produced in accordance with ISO 7810
standard. The device allows reading text and graphic
data from documents, transmitting the obtained data
into the PC for recognizing, processing, verifying,
archiving and comparing the obtained data with the
help of special software algorithms.
1.1.1 The device together with the supplied software
allows the following:
а) capturing colorful images of a document with
up to 470 ppi resolution;
Supported image formats: BMP, JPEG, JPEG 2000,
PNG, TIFF.
b) reading text data from the machine readable
zone (hereinafter referred to as «the MRZ») of
a document in compliance with Doc 9303 ICAO
and ISO 7501 standards: 2 lines with 44 symbols
each, 2 lines with 36 symbols each, 3 lines with
30 symbols each;