2.2 System Identification
EDGE
TM
pipes are clearly identified by their marking. All
pipes bear a print line as shown above with the word
EDGE
TM
repeated at regular intervals. The print lines on
EDGE
TM
pipes are black, whereas RAUTITAN pipes print
lines are white. In addition, compared to the REHAU
RAUTITAN Pipes, the standard EDGE
TM
hot and cold water
pipe is silver as opposed to platinum.
EDGE
TM
sleeves are similar in appearance to the RAUTITAN
System’s PX Sleeves however they have protruding ribs
on the sleeve outer surface in the direction of flow and are
also slightly shorter in length.
EDGE
TM
fittings and sleeves are only compatible
with EDGE
TM
Pipe and must not be used with
other systems, including other REHAU systems.
EDGE
TM
pipe must not be used with RAUTITAN fittings.
EDGE
TM
Sleeve with protruding ribs RAUTITAN PX Sleeve with smooth surface.
EDGE
TM
and RAUTITAN PX Sleeves are not
interchangeable and shall only be used for their
respective systems.
To Next Page
Loading...
Need help?
General