03. Pipes and fittings
3.1 PE-X materials
- Corrosion resistance of the pipes: No pitting
- No tendency for deposits
- Polymer pipe material reduces sound transmission along the pipe
- Good resistance to abrasion
- All EDGE
TM
pipes with WaterMark registration comply with AS/NZS 4020 (Components in contact with
potable water)
Peroxide-crosslinked polyethylene
Peroxide-crosslinked polyethylene is designated PE-Xa. Individual polyethylene molecules are cross-linked to form a three-
dimensional network, under high temperature and pressure with the aid of peroxides. This method ensures an even and very
high degree of crosslinking over the entire cross-section of even, thick-walled, flexible and kink resistant pipes.
Technical data Unit
Hot and cold
water pipe
Hot water pipe Rainwater pipe Recycled
water pipe
Material - PE-Xa PE-Xa PE-Xa PE-Xa
Surface colour - Silver Dark red Green Lilac
Operating pressure (maximum) [bar]
[kPa]
10
1000
8
800
10
1000
8
800
10
1000
8
800
10
1000
8
800
Operating temperature (ISO
15875 classes 1,2)
- Continuous
- Minimum
[ºC]
60
-
70
-
60
-
70
-
60
-
70
-
60
-
70
-
Short-term maximum temper-
ature (malfunction)
[ºC] 95 95 95 95
Maximum/minimum laying
temperature
[ºC] +50 / -5 +50 / -5 +50 / -5 +50 / -5
Oxygen diusion (to DIN 4726) - - - - -
Pipe roughness [mm] 0.007 0.007 0.007 0.007
Available sizes [mm] 16 x 2.0
20 x 2.3
25 x 2.8
32 x 3.6
16 x 2.0
20 x 2.3
25 x 2.8
16 x 2.0
20 x 2.3
25 x 2.8
16 x 2.0
20 x 2.3
25 x 2.8
EDGE
TM
system appraisals and
certificates
WaterMark to AS 2492, AS/NZS 2537, AS/NZS 4020, AS 2345, ISO 15875 Class 1 / 10
bar and Class 2 / 8 bar
(further compliance certificates available on request)
EDGE Silver EDGE Green
EDGE Red EDGE Lilac
Tab. 3-1 Technical data of pipes (approximate values)
Pipes can be subjected to maximum operating
temperature or maximum operating pressure,
but not both.