3.2 EDGE
TM
fitting components
- All fittings and compression sleeves for
EDGE
TM
can be used for water services.
- Do not combine EDGE
TM
fittings or
compression sleeves with components from
other ranges.
- Please note the dimensions of the fittings and
compression sleeves.
- The inner sleeve is removable by design, and
can be clipped back into place.
Dezincification resistance
Under the eects of certain types of drinking water, a
particular form of corrosion known as dezincification can
occur in standard brass alloys, e.g. free-cutting brass.
EDGE
TM
brass fittings are made of special dezincification-
resistant brass and are tested for drinking water installation
according to ISO 6509 and AS 2345.
All elements pictured are supplied pre-assembled
Fitting body
Polymer or DZR Brass
Clip
Inner sleeve
To Next Page
Loading...