3
Electrical Ratings/Specications
The Reichert Mark III refractometer incorporates an auto sensing, switching AC power supply.
Never use an adapter between the power cord and the power source which will interrupt the
protective grounding.
Caution: Risk of electrical shock exists if any cover of the Mark III is removed.
Hazardous voltages will be exposed which can cause injury or death.
Refer servicing to a Reichert trained service technician.
Supply Voltage: 100 - 240VAC 50/60HZ.
Fuse Rating: 800mA, 250V, 5x20mm.
Power Cords: US, EU, UK supplied.
Dimensions: 11” L x 6.25” W x 13.75” H (280 mm x 258 mm x 345 mm).
Net Weight : 17.25 pounds (7.84 kg).
Display: LCD, 1.85” W x 1.85” H (47 mm x 47 mm).
Illumination: Six high intensity LED’s.
Prism Assembly: Stainless steel assembly with glass prisms.
Range, Channel 1: 1.3000 - 1.7000 nD; 0 - 95% Brix per ICUMSA.
Readability: 0.0001 nD; 0.1% Brix.
Precision: +/- 0.0001 nD; 0.1% Brix.
Channel Options: Channel 1 Refractive index, Brix (Sucrose, ICUMSA)
Channel 2 - 15 User dened (Numerous scales available)
Temperature Compensation Range:
10
o
- 40
o
C.
Sample Types: Transparent and translucent liquids or solids.
Sample Temperature Control:
Water bath circulator ports on upper and lower prism assemblies.
Data Output: Two 9 pin RS232 serial ports.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Environmental Conditions
Indoor use only
Operating temperature range: 10
o
C - 80
o
C
Maximum relative humidity: 80% for temperature up to 31
o
C decreasing linearly to 50%
(relative humidity at 40
o
C)
Installation category II (over voltage category)
Pollution degree 2
Altitude up to 2,000 meters
•
•
•
•
•
•
To Next Page
Loading...
Need help?
General
