Why is my Reichert AT555 printer not printing?
If your Reichert Measuring Instruments printer is not printing, it may be due to the printer being out of paper or the printer paper being loaded backwards. Replace the paper with Reichert P/N 12441, or reverse the printer paper.
What to do if my Reichert Measuring Instruments screen is blank?
If the screen of your Reichert Measuring Instruments is blank, the unit might be in Sleep Mode. Depress any button to exit Sleep Mode. Alternatively, the ON/OFF switch may be set to OFF. Press the “—” on the ON/OFF Switch to turn the unit on.
General| Brand | Reichert |
|---|---|
| Model | AT555 |
| Category | Measuring Instruments |
| Language | English |
General safety and reliability warnings for instrument use and maintenance.
Situations where the use of the AT555 is not recommended or advised.
Steps for safely removing the AT555 instrument and its accessories from the packaging.
Procedure to disengage the travel lock mechanism for instrument operation.
Instructions and precautions for connecting and applying power to the instrument.
Identification and description of the various parts and controls of the AT555 instrument.
Explains the meaning and function of icons used in the instrument's operating system.
Overview of factory default settings and instructions on how to customize them.
Summary of default settings for Tonometer, Printout, Communications, and Miscellaneous.
Configuration options for measurement readings and pressure units (kPa or mmHg).
Settings related to date format, time format, printer status, and practice name.
Settings for serial data transmission via RS-232C port, including Baud, Parity, Data Bits, Stop Bits, and Flow.
Settings for language, audible tone, sleep mode duration, and display contrast.
Initial steps for preparing the instrument and the patient for measurement.
Detailed instructions on how the automated alignment system works and patient positioning.
Proper and improper patient alignment examples and guidance for patient positioning.
Process of initiating measurement and visual feedback during alignment.
Options after measurement: sliding forehead rest, clearing data, or printing data.
How to initiate a sample air puff for patient demonstration and system check.
Explanation of readings identified with an asterisk due to blinks or eyelashes.
Explanation of "flier" readings indicated by brackets and their impact on the average.
Handling of the "Too Close" message when the patient's eye is too near the nosepiece.
Handling of the "Touch Sensor Activated" message when a finger is near the nosepiece.
Instructions on how to print measurement data and clear data from memory.
Information about fuse location, rating, and replacement.
Instructions for cleaning the external surfaces of the instrument.
Recommended method for cleaning the forehead rest for hygiene.
Procedure for cleaning positioning and applanation windows to maintain signal quality.
Guidance on replacing printer paper and ordering replacement rolls.
How to access and use the built-in HELP screens for operational information.
A chart detailing common problems, their probable causes, and solutions for the AT555.
Steps to engage the travel lock for shipping or transporting the instrument.
Confirmation of the "parked" position and detailed steps to engage the travel lock.
How to resolve "Printer is Out of Paper" and "Printer Error" messages.
Detailed technical specifications including dimensions, voltage, and measurement range.
Catalog numbers and descriptions for ordering accessories and replacement parts.
Environmental conditions for safe transportation and storage of the instrument.
Classification of the AT555 as Class 1, Class B, and IPX0 equipment.
Explanation of various symbols found on the instrument and in the user's guide.
Reichert's right to make product design changes without prior notification.
Procedure for reporting missing items after receiving the product.
Instructions for reporting and claiming damages incurred during shipping.
To Next Page
