Reichert AT555 - Instrument Setup: Default Settings Summary; Default Settings Details

10
13912-101 Rev. B
Instrument Setup (Continued)
Default Settings (Continued)
This instrument is sent from the factory with measurement, printer, communication, and miscellaneous parameters set to default
settings.These settingscanbe changedtosuittheneedsoftheindividualoperator/clinician.Asummaryofthesesettings
are given below with the default selections shown in bold type. To customize these settings, follow the steps given on page 9,
Instrument Setup, Default Settings.
Customized Options
This instrument has the following default settings:
Tonometer Setup: (page 11)
Readings: Single Avg (3)
Pressure: kPa mmHg
Printout Setup: (page 12)
Date Format: MDY, DMY, YMD
Time Format: AM/PM, 24 HR
Date: 04/17/2000
Time: 05:00 PM
Printer: On, Off
Practice: Reichert
Communications Setup: (page 13)
Baud: 2400, 4800, 9600, 19200
Parity: None, Odd, Even
Data Bits: 7, 8
Stop Bits: 1, 1.5, 2
Flow: None,Xon/Xoff
Printer: On, Off
Miscellaneous Setup: (page 14)
Language: Eng, Fra, Deu, Esp, Por, Ita
Tone: On, Off
Sleep: 5, 10, 20, 90
Contrast: +,–
Note: Default settings are shown in Bold type.