Reichert AT555 User Manual

5
13912-101 Rev. B
Instrument Setup
Great care has been taken to deliver your new AT555 Auto Non-Contact Tonometer to you safely. The container and packaging
was specially designed to transport this unit. Please retain the packaging if future transportation is required.
Unpacking Instructions
User’s Guide,
Quick Ref. Card,
& Dust Cover
Screwdriver
Power
Cord
Printer
Paper
Figure 2, Instrument Components
Printer
Paper
Figure 1, Shipping Container
Shipping
Container
Accessories
Top Foam
Figure 3, AT555 with Cradle
Cradle
AT555
Upper Foam
Lower Foam
Please remove the packaging material from the instrument in the
following manner (Refer to Figures 1 thru 3).
The instrument is packaged in a shipping container to protect
the instrument from damage during shipment. Please read the
User’s Guide before operating the unit. A quick Reference Card
is provided for your convenience and reference during operation
of the unit.
1. Remove the Top Foam from the Shipping Container.
2. Remove the accessories from the Upper Foam:
 • Powercord
 • Dustcover
 • Spareprinterpaper(2rolls)
 • Phillips-headscrewdriver
 • QuickReferenceCard
 • User’sGuide
3. Remove the Upper Foam that secures the unit. Lift the unit
out of the Inner Box using the handle slots provided on the
Cradle.
4. Unfold the Cradle and remove the plastic bag over the unit.
Set the unit on a secure table.
5. Put the packaging materials in a safe place of storage so
that if transportation is required in the future, they will be
available.

Reichert AT555 Specifications

General

Brand	Reichert
Model	AT555
Category	Measuring Instruments
Language	English