◆ USB available for charging, output voltage/ max
output
current: 5V/1A
◆ WiFi function
◆ Error code display
◆ Instrument is available for one-key battery wakeup.
◆ Setting function display: clearing, light sensing, speed
unit, power consumption unit, language selection,
factory reset, WiFi status and name, automatic
shutdown time, and customized clipping
function.
◆ Read-only information display:
Firmware & hardware version numbers and serial
number of motor, total mileage;
Firmware & hardware version numbers, serial number,
voltage, cycle count and SOH of battery;
Firmware & hardware version numbers, and serial
number of the instrument
◆ Automatic control of backlight brightness (according
to intensity of external ambient light)
◆ Automatic control of headlight on and off (according
to intensity of external ambient light)
◆ Instrument conforms to EN 15194: 2017.
◆ WiFi meets RED certification requirements.
◆ Conform to CE certification requirements.
◆ Instrument supports ADST function (refer to the
Instructions
for Use of Full Functions of ADST Programmer Box).
◆ Communication protocol: Ananda New European
Standard Instrument Controller V11.0 Protocol_1.3.4 and
version above (the latest version shall prevail,
compatible with the previous versions)
◆ It may match with wide-voltage battery 24V/ 36V/48V
◆ Max working current is 50 mA.
To Next Page
Loading...
