◆ The instrument has been turned on when the battery
has output. The battery will be closed and the system
will be turned off if the instrument is shut off before the
battery.
◆ If the instrument has been turned on when the
battery has output, the instrument will be shut off by
keeping the instrument on-off key pressed for 2
seconds. If the instrument is not opened, the
instrument will be opened by keeping the instrument
on-off key pressed for 1 second.
◆ This instrument is such set that it will enter auto-sleep
mode if the system has been idle for 5 consecutive
minutes (specific time can be set via instrument
parameter/ automatic shutdown time) and the
instrument current is lower than 6 mA in the sleep
mode, as factory default.
◆ The battery will be closed and the system will be
turned off automatically if the system has been idle for
30 consecutive minutes.
◆ After startup, the instrument will firstly show the
interface “ANANDA” and then enter into the main
interface.
Startup interface Main interface
To Next Page
Loading...
