Maintenance
• Regularly check the device. Pay attention to visible damage to housing our power cord.
• Clean the o-ring inside the lid as well as the rim regularly and lubricate it, using a
temperature-resistant silicone-lubricant (food safe), e.g. OKS 1110 (sample enclosed).
Silicone lubricant OKS 1110 available on request.
• Replace the o-ring (inside the lid) semi-annually.
• Change the water once a week.
• Clean the housing regularly with a damp cloth.
Note
Clean and protect your device regularly with the REITEL stainless steel care spray
(order-no.: 90405000) to remove lime, plaster and dust as well as other contaminants
from the surface of equipment and to prevent corrosion. The spray creates a water
repellent protective film which helps keep the equipment clean.
To Next Page
Loading...
