What to do if REITEL Laboratory Equipment safety valve opens or water drips?
If the safety valve opens or water drips, try slightly down-regulating the heating control and call service. If the tank is overfilled, drain some water off.
What to do if REITEL Laboratory Equipment doesn’t work after turning it on and the power switch doesn’t shine?
If the REITEL Laboratory Equipment doesn't work and the power switch doesn't shine, the issue might be due to no power at the socket. Check the building’s fuse to ensure there is power.
Why is there no steam pressure in my REITEL Laboratory Equipment?
If there is no steam pressure, the heating control might not be set to max. Make sure that the heating control is set to the maximum level.
What to do if my REITEL Laboratory Equipment has a short circuit?
In case of a short circuit with water in the housing, immediately shut down the device and pull the plug. Contact customer service.
What to do if control lamp shines, although water has been filled up and steam was taken out in REITEL Laboratory Equipment?
If the control lamp shines even after filling water and taking out steam, the temperature limiter or heating control might have switched off. Set the heating control to max and, after cooling down, press the temperature limiter at the back of the device again.
What to do if REITEL Laboratory Equipment machine’s fuse has blown?
If the machine’s fuse has blown, unplug the whole unit and change the device’s fuse.
What to do if REITEL Laboratory Equipment doesn’t work after turning it on?
If the device doesn’t work after turning it on, check the building’s fuse and the device’s fuse.
What causes high wear of seals in REITEL Laboratory Equipment?
For high wear of seals, ventilate the tank by activating the steam gun button.
How to fix static charge in REITEL Laboratory Equipment?
To fix static charge, touch the contact screw at the steam gun while jetting.
How to fix a dripping pistol on REITEL Laboratory Equipment?
If the pistol drips, the device might be calcified or the valve might be blocked. Decalcify the device.
Lists the core components included with the STEAMY MINI.
Lists optional accessories available for purchase for the device.
Identifies all control and functional elements of the device.
Provides specifications and performance metrics of the STEAMY MINI.
General safety precautions and guidelines for device operation.
Safety instructions for steam, static electricity, and usage.
Step-by-step guide for operating the STEAMY MINI.
Procedure for removing limescale deposits from the device.
General| Brand | REITEL |
|---|---|
| Model | STEAMY MINI |
| Category | Laboratory Equipment |
| Language | English |
To Next Page
