1
MS 200 MS 80
Product Description
Dear customer,
the glue applicator you purchased will help you to glue parts together more easily and more rapidly. To ensure an optimum usage
of the glue applicator we recommend that you read these instructions thoroughly before using the applicator for the first time.
The following illustration shows where to find the serialnumber of the applicator:
Eggenstein-Leopoldshafen, Germany October
The applicator works with non reactive hot-melt glue which is dispensed by a mechanical conveying system. It is suitable for hot-
melt from 1000 up to 15.000 mPas*. Therefore, this glue applicator should only be used by qualified persons who have been
familiarized with the proper use and the safety precautions. Handling the applicator properly will avoid unnecessary accident
hazards and problems.
Bodily injury or material damage caused by not using the glue applicator as intended shall not be the manufacturer's, but the
user's responsibility.
Intended Use
*less than 1000 and more than 15.000 mPas possible with limitations.
All manuals and user guides at all-guides.com
To Next Page
Loading...
