06
1
2
3
4
56 7
8
9
10
11
12
13
14
Pour the remaining solution out of the tank. You may see bits of sediment and
mineral come out at this point.
4. Rinse the tank with clean water until there is no smell of vinegar or any sedi-
ment bits coming from inside the tank. NOTE: Sediment/mineral pieces can
be blown into the solenoid valve or the steam nozzle during operation so it is
important that they are not left in the tank after cleaning.
5. The unit is now ready for use.
WATER INSTRUCTIONS
Use tap water or 50/50 tap/distilled water in the appliance. Do not use perfume or
products containing alcohol in the appliance.
DESCRIPTION OF THE IRON STATION
1. Safety cap
2. Mono hose
3. Steam iron switch
4. Boiler switch
5. Low water light
6. Temperature regulating knob
7. Steam button
8. Thermostat reset button
9. Steam regulation knob
10. Pressure guage
11. Funnel
12. Wand to support mono hose
13. Water level measuring stick
14. Iron rest
* Not exactly as shown.
TECHNICAL DATA
Full aluminium-plated heating element at 800W – 120V
Boiler power 4000IS: 1000W
Working pressure 4000IS: 50 psi/3.5 bar
Tank nominal capacity of model 4000IS: 2.5 litres
To Next Page
Loading...
