Reliable F1 Series Bulletin

Model F1-80 Pendent
Model F1-80 Upright
F1-80 Series Sprinklers Summary
Sprinkler
Model
K-Factor gpm/psi
1/2
(lpm/bar
1/2
)
Max. Working Pressure
psi (bar)
Listings & Approvals Orientation
Sprinkler
Identication
Number (SIN)
F1-80 8.0 (115)
175 (12)
250 (17) (cULus only)
cULus, FM, LPCB,
VdS, CE
Upright RA6222
Pendent RA6212
Table A
Features
• Standard coverage standard-response sprinklers
• Upright and pendent orientations
• Low prole, compact design
• Available in a wide variety of nishes
• Available as Intermediate Level sprinklers
Product Description
Reliable Model F1 series sprinklers are standard-response
standard spray automatic re sprinklers utilizing a 5mm glass bulb
thermal element.
Pendent sprinklers may be installed exposed or surface mounted
using escutcheons such as the Reliable Models B, C, or HB
(reference Technical Bulletin 204). When installed recessed, the
Model F1-80 series sprinklers are specically listed with and
may only be installed with listed Reliable recessed escutcheons.
Refer to the technical information on the following pages for
specic listings for recessed installations and refer to Figure 3 for
dimensional information.
When tted with an approved Reliable water shield, these
sprinklers may considered intermediate sprinklers for use
in racks, below grated walkways, and other areas where
intermediate level sprinklers are required.
Table A provides a summary of the approvals and availability
of specic Model F1 series sprinkler congurations. Additional
technical information for each sprinkler model is provided on the
following pages.
www.reliablesprinkler.com
K-factor 8.0 (115)
F1-80 Series
Standard-Response Sprinklers
Bulletin 062 June 2022

Reliable F1 Series Specifications

General

Brand	Reliable
Model	F1 Series
Category	Irrigation System
Language	English