Reliable G Series Bulletin

Model G Conventional
Model G Series Conventional Sprinklers
Sprinkler
Model
K-Factor gpm/psi
1/2
(lpm/bar
1/2
)
Orientation Response
Listings &
Approvals
Max. Working
Pressure psi (bar)
Sprinkler
Identication
Number (SIN)
G
4.10 (59.1)
Conventional SR
Planiere Assemblee
175 psi (12 bar)
R1074
5.62 (81.0)
LPCB, CE, Planiere
Assemblee
R1075
8.2 (118.2)
LPCB, CE, Planiere
Assemblee
R1077
Table A
Note: Not all versions of the sprinkler are shown.
Features
• Standard response
• Conventional deflector
• Robust solder capsule thermal element
• Available in a wide variety of nishes
Product Description
Conventional (or “old-style” sprinklers) direct approximately 40%
of their water discharge up against the ceiling and the remainder
downward to the floor, and may be used in either the upright or
pendent position.
Reliable Model G Conventional Sprinklers are standard-response
re sprinklers utilizing a solder capsule/strut and lever thermal
element.
These sprinklers are available in 4.10 (59.1 metric), 5.62 (81.0
metric), and 8.2 (118.2 metric) K factor.
When used in the pendent position, sprinklers may be installed
exposed or surface mounted using escutcheons such as the
Reliable Models B, C, or HB (reference Technical Bulletin 204).
Table A provides a summary of the approvals and availability of
specic Model G Series Conventional sprinkler congurations.
Additional technical information for each sprinkler model is
provided on the following pages.
www.reliablesprinkler.com
K Factor 4.10 (59.1), 5.62 (81.0), and 8.2 (118.2)
Model G
Conventional Sprinklers
Bulletin 079 May 2021

Reliable G Series Specifications

General

Brand	Reliable
Model	G Series
Category	Irrigation System
Language	English