How to troubleshoot a Reliance Medical Equipment chair that won't turn on?
If your Reliance Medical Equipment chair will not operate, and you don't hear a beep when power is applied, here's what to check: * Ensure the power cord is properly plugged in and check all wiring connections. * Verify that there is AC power at the wall receptacle; if not, restore outlet power. * Inspect the line fuse and replace it if it's blown.
Why is my Reliance HS 7000 chair wobbling?
If the Reliance Medical Equipment chair top "wobbles" on the chair base, it's likely due to a low hydraulic fluid level.
What to do if Reliance HS 7000 chair top binds up?
If the Reliance Medical Equipment chair top "binds-up", the possible causes are: * The chair control cable is not plugged in. Check cable connections at the stand chair. * There is a blown fuse in the chair base. Replace the fuse.
What to do if Reliance HS 7000 Medical Equipment chair base will not raise?
If the Reliance Medical Equipment chair base will not raise, consider the following: * Check for voltage to ensure there is power to the pump motor assembly. * Inspect the up-limit switch; it may be stuck "open". Readjust or replace the switch. * The pump motor may be burned-out. Replace the pump motor assembly.
Why is my Reliance HS 7000 Medical Equipment chair base not lowering?
If the Reliance Medical Equipment chair base will not lower, the possible causes are: * Solenoid valve not closed because of dirt in the valve. Repair or replace the solenoid valve. * Constant power applied to the solenoid. Check for switches stuck "closed".
What to do if footswitch functions are not operating on Reliance Medical Equipment?
If the footswitch functions are not operating on your Reliance Medical Equipment, check that the footswitch cord is properly connected. Inspect all internal and external footswitch wiring.
Why is the memory system inoperative on my Reliance HS 7000?
If the memory system is inoperative in your Reliance Medical Equipment, the possible causes are: * The system is not programmed properly. * There are loose connections under the chair seat. Check all wiring connections.
General| Brand | Reliance |
|---|---|
| Model | HS 7000 |
| Category | Medical Equipment |
| Language | English |
Explains standard symbols used in the manual for safety alerts and instructions.
Specifies environmental conditions for safe shipping and storage of the chair.
Details DANGER, WARNING, CAUTION symbols and their meanings for user safety.
Provides contact information for product support, including address and phone number.
Lists electrical ratings, safety certifications, and model for 120V chairs.
Lists electrical ratings, safety certifications, and model for 220-240V chairs.
Warns about explosion risks with anesthetics and potential electromagnetic interference.
Instructions for carefully removing the chair from its packaging and shipping materials.
Guides for assembling components like headrest, power receptacle, and setting rotation stop.
Explains the function and location of the STOP switch for controlling chair movement.
Details how to raise and lower the chair using membrane switches and the footswitch.
Instructions for raising and reclining the chair top using membrane switches and the footswitch.
Describes the automatic return feature for returning the chair to an upright position.
Explains programming and using preferred chair positions via the memory function.
How to rotate the chair and use its locking mechanism.
Instructions for adjusting the chair arms for patient access.
How to retract the chair's footrest.
Details operation and adjustment for various headrest models.
Describes the built-in feature to prevent unauthorized use by disabling chair functions.
Explains programming switches for MOMENTARY or MAINTAINING operation modes.
How to enable or disable audible feedback (beeps) when switches are pressed.
Details the feature for automatic chair lift and recline for retinal specialists.
How to program the chair to move to a default 'home' position.
Instructions for safely locating and replacing fuses within the chair's AC input module.
Lists typical problems and provides specific troubleshooting steps for resolution.
Guidance on cleaning upholstery, including stain removal and disinfection methods.
Instructions for cleaning the chair's powder-coated metal surfaces.
Lists tested and recommended disinfectants for cleaning the chair.
Advises on how to order parts, requiring model/serial numbers and color specifications.
Outlines the terms, conditions, and limitations of the product warranty.
To Next Page
