Need help?Do you have a question about the Reliant Rialto 2 1984 and is the answer not in the manual?
Initial dealer inspection for vehicle condition.
Scheduled servicing by Reliant Dealers.
Terms of warranty and rectification requirements.
Entrusting service to authorised dealers.
Importance of quoting chassis and engine numbers.
Emphasis on using genuine Reliant parts.
Availability of an exchange scheme for major items.
Introduction to instruments and controls for safe operation.
Explanation of speedometer, odometer, and direction indicator warning lights.
Details on fuel, temperature, ignition, and main beam warning lights.
Descriptions of oil pressure warning, quartz clock, and fuel economy gauge.
Operation of ignition/starter switch and lighting controls.
Operation of hazard warning, rear fog lamp, and heater switches.
Information on brake warning light, wipers, and heated rear window controls.
Operation of the multi-purpose steering column switch.
Details on carburettor choke, heater controls, and air vents.
Operation of the gear shift lever and handbrake.
Description of accelerator, brake, and clutch pedals.
Information on door, luggage, and engine compartment locks.
How to adjust the front seats for driver comfort.
How to fold down the rear seat squab and secure the seat cushion.
Location and contents of the tool roll and spare wheel.
Instructions on wearing, adjusting, and engaging/releasing seat belts.
Procedures for starting the engine in cold and hot conditions.
Guidelines for the initial 1,000 miles to ensure durability and economy.
Importance of regular inspection, maintenance, and lubrication.
Recommended periods for routine, standard, and major service checks.
Details on greasing points and types of lubricants.
List of general checks for air cleaner, hoses, plugs, etc.
Specific oil and grease recommendations for various components.
Procedures for checking, changing, and topping up engine oil and filter.
Checking and topping up oil filler cap and gearbox oil levels.
Checking and topping up rear axle and steering box oil levels.
Lubrication of front suspension, swivel pin, and wheel bearings.
Greasing of drive shaft splines and topping up carburettor dashpot.
Checking and topping up the brake fluid level.
Oiling door hinge pivots and restraint springs.
Location and access to three service panels for maintenance.
Importance and procedure for adjusting tappet clearances.
Procedure for checking and adjusting the fan belt tension.
Guidelines for examining brake linings and adjusting brakes.
Detailed steps for adjusting front brake shoes for proper clearance.
Steps for adjusting rear brake shoes and the handbrake cable.
Recommended jacking points and checking wheel nuts.
Procedure for adjusting the clutch cable for correct free movement.
Emission regulations and basic carburettor adjustment.
Procedure for adjusting the throttle adjusting screw for desired idling speed.
Adjusting fast idle screw and mixture control for engine performance.
Maintenance of fuel overflow reservoir and replacement of fuel filters.
Servicing and replacement of the air cleaner element.
Adjustment and replacement of contact breaker points.
Recommendations for spark plug gap, cleaning, and replacement.
Procedures for checking coolant level, anti-freeze, and flushing.
Guidelines for towing the vehicle safely.
Information on tyre types, pressures, rotation, and repair.
Role of the distributor, vacuum advance, and lubrication.
Static timing procedure using TDC marks and distributor rotation.
Maintenance of the alternator and replacement of high tension leads.
Location of fuse box, battery care, and starter motor operation.
Topping up battery cells, checking gravity, and jump starting procedures.
How to adjust headlamp beams.
Procedures for replacing headlamp bulbs and units.
Accessing and replacing bulbs in front/rear lights and fog lamps.
Replacing bulbs in hazard, indicator, and various warning lamps.
Accessing bulbs for interior light and number plate lamp.
A comprehensive list of bulbs, their part numbers, voltage, and wattage.
Controls for tuning, volume, tone, and pre-setting radio stations.
Guidelines for cleaning, polishing, and minor repairs to body panels.
Instructions for cleaning upholstery, fascia, and interior surfaces.
Details on engine configuration, performance figures, and lubrication system.
Ignition system details, timing, dwell angle, and cooling system information.
Carburettor type, clutch, and gearbox specifications.
Details on rear axle, steering, brakes, and suspension systems.
Tyre sizes, and fluid capacities for various systems.
Overall lengths, widths, and loading capacities.
Gross laden weight, payload, and axle weight limits.
Guidance on positioning loads and warnings against overloading.
General| Brand | Reliant |
|---|---|
| Model | Rialto 2 1984 |
| Category | Automobile |
| Language | English |
To Next Page
