Reliant ROBIN 850 - User Manual

Details engine specifications including cylinders, bore, stroke, capacity, compression ratio, and valve clearances.

Specifies maximum brake horse-power and torque figures for the vehicle.

Details the lubrication system components: pump, filter, and oil pressure.

Provides gearbox specifications including forward speeds, synchromesh, and gear ratios.

Details the brake system, including sizes for front and rear, and handbrake operation.

Covers ignition system components: battery, contact breaker gap, spark plugs, firing order, and timing.

Specifies cooling system details, including radiator cap pressure.

Lists fuel system components: carburettor, fuel pump, and air cleaner.

Details the clutch type and operation.

Describes front and rear suspension systems.

Provides overall exterior dimensions for Saloon and Van models.

Details the load capacities for the rear compartment of Saloon and Van models.

Lists capacities for engine, gearbox, rear axle, steering box, cooling system, and fuel tank.

Specifies tyre type and standard/optional sizes.

Illustrates and lists lubrication points on the vehicle chassis and components.

Outlines routine service operations and their recommended mileage intervals.

Details on frame checking dimensions, diagrams, and the procedure for checking chassis squareness.

Covers the front suspension system description, routine maintenance, and component removal/assembly.

Details the rear suspension components: leaf spring, damper unit, anti-roll bar, and bump stop.

Explains the steering mechanism, routine maintenance, and procedures for box/column removal and dismantling.

Covers cooling system description, maintenance, anti-freeze, draining, refilling, and leak checking.

Provides comprehensive engine details, maintenance, removal, installation, and component servicing.

Covers gearbox overview, maintenance, removal, installation, dismantling, and assembly procedures.

Details rear axle description, maintenance, removal, replacement, bearings, dismantling, and assembly.

Explains the braking system, maintenance, adjustments, bleeding, and component procedures.

Covers tyre pressures, jacking positions, wheel removal, valves, and tyre balance.

Details exhaust system components, removal, and installation procedures.

Covers fuel tank, pump, carburettor, air cleaner, and related maintenance/troubleshooting.

Details door mechanisms, windows, hinges, seals, bonnet, and body mounting.

Covers front seats, seat belts, rear seat, carpets, headlining, and fascia/centre console.

Provides procedures for removing and servicing the heater unit, control valve, matrix, motor, and fan.

Covers ignition, starting, charging, lighting, instruments, and wiring systems.

Details the windscreen washer system, pump, and jet removal/replacement.

Provides information on radio installation, suppression, aerial, and tightening torques.