Do you have a question about the Reliant Kitten Saloon and is the answer not in the manual?
Detailed specifications for the engine, including bore, stroke, and capacity.
Information on brake system type, size, and handbrake operation.
Table detailing lubrication and maintenance tasks by mileage interval.
Procedures for checking, topping up, and changing engine oil and filter.
Checking and topping up the cooling system and brake fluid reservoir.
Checking and adjusting distributor contact breaker points.
Adjusting the fan belt tension for optimal drive.
Procedures for checking chassis squareness and distortion.
Routine maintenance tasks for the front suspension system.
Steps to remove and replace the front suspension assembly.
Procedures for removing and replacing the anti-roll bar.
Replacing the front damper and spring assembly.
Procedures for replacing ball joints and bushes in suspension.
Overhauling and adjusting the front wheel hub bearings.
Routine maintenance for rear suspension components like bushes and dampers.
Steps to remove and replace the rear leaf springs.
Procedures for removing and replacing the rear damper units.
Routine checks and adjustments for the steering system.
Adjusting toe-in, camber, and castor angles of the front wheels.
Procedures for steering rack and column removal, replacement, and adjustment.
Overhauling the steering gear, including joint and gaiter replacement.
Routine checks for coolant level and fan belt tension.
Importance and use of anti-freeze in the cooling system.
Procedures for radiator and water pump removal and replacement.
Testing and replacing the thermostat unit.
Detailed steps for engine removal and installation.
Procedures for flywheel, crankshaft, and bearing service.
Procedures for sump and oil pump removal and replacement.
Replacing timing chain components and cylinder head service.
Replacing pistons, connecting rods, and bearings.
| Brand | Reliant |
|---|---|
| Model | Kitten Saloon |
| Category | Automobile |
| Language | English |