6
NO. CONTROL / ELEMENT SERATODJ DJAY PRO
14 SAMPLER VOL Adjusts master volume of sampler output Adjusts master volume of sampler output
15 TRAX (turn) Scrolls through itmes in currently focused list / selection Opens library and scrolls through itmes in currently focused list /
selection
SHIFT + 15 TRAX (turn) Scrolls through itmes in currently focused panel faster Switches between the different library tabs.
15 TRAX (press) Moves focus to next area of library or panel Opens library and/or moves focus to next area of library or panel
16 BACK Moves focus to previous area of library or panel Closes library and/or moves focus to previous area of library or panel
SHIFt + 16 VIEW Cycles between available views Enlarges the playlist view.
17a MST LED LEFT Indicates master output level of left channel Indicates master output level of left channel
17b MST LED RIGHT Indicates master output level of right channel Indicates master output level of right channel
18 CF CURVE Determines curve of crossfader between cut and smooth slope Determines curve of crossfader between cut and smooth slope
19 CROSSFADER Fades between channels assigned to the left or right of crossfader Fades between channels assigned to the left or right of crossfader
20a FX1-knob
Single FX
Multi FX
-> Adjusts FX parameter (FX depth)
-> Adjusts FX depth of FX slot 1
-> N/A
-> Adjusts dry/wet of FX slot 1
SHIFT + 20a FX Select
Single FX
Multi FX
-> Selects effect for FX unit
-> Selects effect for FX unit / Slot 1
N/A
20b FX2-knob
Single FX
Multi FX
-> Adjusts FX parameter
-> Adjusts FX depth of FX slot 2
-> N/A
-> Adjusts dry/wet of FX slot 2
SHIFT + 20b FX Select
Single FX
Multi FX
-> N/A
-> Selects effect for FX unit / Slot 2
N/A
20c FX3-knob
Single FX
Multi FX
-> Adjusts FX parameter
-> Adjusts FX depth of FX slot 3
-> N/A
-> Adjusts dry/wet of FX slot 3
SHIFT + 20c FX Select
Single FX
Multi FX
-> N/A
-> Selects effect for FX unit / Slot 3
N/A
21 BEATS / PARAMETER
(turn)
Controls beats multiplier value for DJ-FX Adjusts parameter for FX slots 1-3
21 BEATS / PARAMETER
(press)
Resets beats multiplier to value 1/1 Sets the parameter of FX Slot 1-3 to its original value.
22a FX1 ON
Single FX
Multi FX
-> Enables effect on or off
-> Enables effect 1 on or off
-> N/A
-> Enables effect 1 on or off
SHIFT + 22a SELECT Cycles down through the Effect Slot menus for FX slot 1 Cycles down through the Effect Slot menus for FX slot 1
22b FX2 ON
Single FX
Multi FX
-> Dis-/Enables various parameters
-> Enables effect 2 on or off
-> N/A
-> Enables effect 2 on or off
SHIFT + 22b SELECT Cycles down through the Effect Slot menus for FX slot 2 Cycles down through the Effect Slot menus for FX slot 2
22c FX3 ON
Single FX
Multi FX
-> Dis-/Enables various parameters
-> Enables effect 3 on or off
-> N/A
-> Enables effect 3 on or off
SHIFT + 22c SELECT Cycles down through the Effect Slot menus for FX slot 3 Cycles down through the Effect Slot menus for FX slot 3
23 TAP Manually taps FX tempo for FX unit. Reset when held. Activates FX Slot 1-3 as long as the button is being held. When
released, the FX Slot 1-3 will deactivate.
SHIFT + 23 MODE Toggles between controlling/displaying Single or Multi FX modes Sets a beatgrid marker at the current track position.
24a PITCH Determines tempo of track Determines tempo of track
24b PITCH LED Lit when PITCH-fader is in 0% position Lit when PITCH-fader is in 0% position
25 SLIP Enables Slip-mode on or off. When Slip-mode is active after various
actions (e.g.: cue points or scratches) playback will continue at the
point to where it would have been if you had not done anything.
Enables Slip-mode on or off. When Slip-mode is active after various
actions (e.g.: cue points or scratches) playback will continue at the
point to where it would have been if you had not done anything.
SHIFT + 25 VINYL Toggle between vinyl (touch sensitive scratch) and jog mode (only
pitch bend) for platter. (-> no. 38a)
Toggle between vinyl (touch sensitive scratch) and jog mode (only
pitch bend) for platter. (-> no. 38a)
26 KEY LOCK Enables keylock on or off. When button is long pressed, tempo will
be reseted.
Enables keylock on or off. When button is long pressed, tempo will
be reseted.
SHIFT + 26 PITCH RANGE Toggles between available pitch ranges. Toggles between available pitch ranges.
27 KEY SYNC*1 Activate key sync to match the key of the current deck to the opposite
one (harmonic mixing).
When button is held, keys can be shifted with PARAMETER +/-
buttons. When the button pressed quickly twice, the key will jump
back to the root key.
Activate key sync to match the key of the current deck to the opposi-
te one (harmonic mixing).
When the button pressed quickly twice, the key will jump back to
the root key.
SHIFT + 27 CENSOR Puts playhead in reverse for the period of time the button is held.
Once the button is released, the playback will continue at the point to
where it would have been if you had not done anything.
Puts playhead in reverse for the period of time the button is held.
Once the button is released, the playback will continue at the point
to where it would have been if you had not done anything.
28a LOOP LENGTH Halves/Doubles the loop length Halves/Doubles the loop length
SHIFT + 28a LOOP SHIFT Loop is shifted to the left or right. Loop is shifted to the left or right.
28b LOOP LENGTH LED Displays the current selected loop length:
1/32 -> LED 1 ashing
1/16 -> LED 2 ashing
1/8 -> LED 3 ashing
1/4 -> LED 4 ashing
1/1 -> LED 1 Lit
2/1 -> LED 2 Lit
4/1 -> LED 3 Lit
8/1 -> LED 4 Lit
16/1 -> LED 5 Lit
32/1 LED 1-5 Lit
Displays the current selected loop length:
1/32 -> LED 1 ashing
1/16 -> LED 2 ashing
1/8 -> LED 3 ashing
1/4 -> LED 4 ashing
1/1 -> LED 1 Lit
2/1 -> LED 2 Lit
4/1 -> LED 3 Lit
8/1 -> LED 4 Lit
16/1 -> LED 5 Lit
32/1 LED 1-5 Lit
To Next Page
Loading...
Need help?
General
