Reloop Mixtour User Manual

ENGLISH
P1
V1.0
All-In-One Controller with Audio Interface for iOS / Android / Mac for djay
QUICK START GUIDE
INSTALLATION & SETUP
MIXTOUR
RCA
POWER
1x HP
• Mixtour is a dedicated controller for the djay 2 app by Algoriddim for iOS & Android;
it is a class compliant USB plug-and-play device for Mac and PC*
• Please download and install the djay 2 app from the Apple AppStore, Google Play Store or
Amazon AppStore or the djay Pro version, respectively
• Connect the appropriate cable (Lightning / OTG Android / USB)
• Connect Mixtour to your sound system via the master output (RCA) and connect your headphones
• Make sure that your Mixtour is turned off
• Connect the included power supply unit (only necesssary for iOS connection)
• During connection, make sure that volume controls are in minimum position
• Turn on your Mixtour and launch the djay 2 app
• Your Mixtour will be recognised and installed without further conguration
Note: If you have a Spotify premium account, you can connect it to the djay 2 app in order to have
access to millions of tracks within the app. To use Spotify an active internet connection is required.
Software: www.algoriddim.com | Driver & Firmware Updates: www.reloop.com
*ASIO drivers required

Reloop Mixtour Specifications

General

Mixer section	No
Product color	Black
Backlight buttons	Yes
USB direct playback	-
Signal-to-Noise Ratio (SNR) (headphone out)	-80 dB
Total Harmonic Distortion plus Noise (THD+N)	0.05 %
USB connector type	USB Type-B
USB ports quantity	1
Docking connector type	Apple Lightning
Headphone connectivity	3.5 mm
Apple docking compatibility	iPad 4, iPad mini, iPhone 5, iPhone 5c, iPhone 5s, iPhone 6, iPhone 6 Plus, iPhone 6s, iPhone 6s Plus
Power supply type	AC
Mac operating systems supported	Mac OS X 10.9 Mavericks
Cables included	AC, USB

Weight and Dimensions

Depth	310 mm
Width	129 mm
Height	26 mm
Weight	809 g

Summary

Mixer Section Controls

Master Volume Control

Controls the master output volume.

Headphone Volume Control

Controls your headphones volume.

Headphone Mix Control

Mixes headphone signal between selected channel and master output.

Deck Monitoring (Cue)

Allows you to monitor each deck via your headphones.

Gain Adjustment

Fine adjusts the input volume for each deck.

Equalizer (EQ)

Controls the high, mid and low frequencies.

Filter Effect

Filters out high frequencies (turn left) or low frequencies (turn right).

Filter FX

Adds an effect to the Filter.

Linefader Control

Adjusts channel volume.

Crossfader

Enables you to fade between your decks.

Navigation and Transport Functions

Track Selection

Use the Track Select Encoder to browse your library.

Track Loading

Press to load tracks onto either deck.

Auto Loop Function

Activates/deactivates auto loop based on length.

Sync and Double Loop

Syncs track BPM or doubles loop length.

Cue Point and Grid Setting

Go to cue point or set a grid point.

Play/Pause and Return to Start

Launch, pause tracks, or return to the start.

Additional Functions and Connections

VU-Meter Function

Shows the current level of deck PFL or master signal.

VU-Meter Switch

Toggles VU-Meter between PFL and master metering.

Shift Button Functionality

Accesses a different function when SHIFT is pressed.

Connection Ports Overview

Details physical connection ports for power, audio, and USB.