QUICK START GUIDE
NAVIGATION SECTION
11. TRACK SELECT Use the Track Select Encoder to browse through your
iTunes / Spotify library.
12. LOAD 1/2 Press 1 or 2 to load tracks onto either deck.
SHIFT + LOAD 1/2: Herewith you can jump between the
various media library tabs.
TRIGGER CUE & TRANSPORT SECTION
13. AUTO LOOP By pressing, it becomes instantly active, according to
the length. Pressing again deactivates auto loop.
SHIFT+AUTO LOOP = HALF LOOP: Divides loop length in half.
14. SYNC Sync automatically matches a track to the BPM of the
other deck. SHIFT+SYNC = DOUBLE LOOP:
Doubles the loop length of the current active loop.
15. CUE Pressing CUE will take you to the last set cue point. If no
cue point was set, one will now be set automatically at
the current paused position. SHIFT+CUE = SET GRID:
Sets a grid point at the selected position.
16. PLAY/PAUSE Press to launch and pause your track.
SHIFT+PLAY/PAUSE = RETURN TO START:
Returns to the start of the track.
11
12
TRANSPORT MODE (T) (LEDs = ORANGE)
HOT CUE MODE (C) (LEDs = GREEN)
Press a pad to set a HOT CUE (C1 – C4) & trigger when set.
Press SHIFT+CUE (C1 - C4) to delete a HOT CUE.
14
15
16
13
To Next Page
Loading...
Need help?
General
Weight and Dimensions
