QUICK START GUIDE
MIXER SECTION
1. MASTER Controls the master output volume.
2. CUE VOL. Controls your headphones volume.
3. CUE MIX Mixes the headphones signal between your selected channel and
the master output signal.
4. CUE Allows you to monitor each deck via your headphones.
SHIFT + CUE left/right = Preview/Queue Preview: Lets you directly
monitor the currently selected track in your playlist without having
to load it. Queue: Loads the track into the waiting queue tab.
5. GAIN Fine adjusts the input volume for each deck.
6. EQ Controls the high, mid and low frequencies.
7. FILTER This effect lters out high frequencies (turn left) or low frequencies
(turn right). The blue LED will light up when the Filter is adjusted.
8. FILTER FX Adds an effect to the Filter. The chosen effect can be selected
within the Effect 1 slot for each deck.
9. LINEFADER Adjusts channel volume.
SHIFT+LINEFADER = FADER-START:
Hold SHIFT and bring up a linefader to automatically start the track
from the temporary cue point. Bring the line fader down and the
track returns to the temporary cue point and goes into pause mode.
10. CROSSFADER Enables you to fade between your decks.
15
6
7
9
10
8
2 3
4
To Next Page
Loading...
Need help?
General
Weight and Dimensions
