Reloop RMX90DVS User Manual

13
ENGLISH
CAUTION!
For your own safety, please read this operation manual carefully before initial operation! All persons involved in the installation, setting-up,
operation, maintenance and service of this device must be appropriately qualied and observe this operation manual in detail. This product
complies with the requirements of the applicable European and national regulations. Conformity has been proven. The respective statements
and documents are deposited at the manufacturer.
Congratulations on purchasing your Reloop RMX-90DVS mixing console. Thank you for placing your trust in our disc jockey technology. Before
operating this equipment we ask you to carefully study and observe all instructions.
Please remove the Reloop RMX-90DVS from its packaging. Check before initial operation to make sure that the device has not been visibly da-
maged during transport. If you detect any damage to the power cable or the casing, do not operate the device. Contact your specialised dealer.
SAFETY INSTRUCTIONS
CAUTION! Please exercise particular caution when handling the power voltage AC 100-240V, 50/60Hz. This voltage rating may lead to a critical
electrical shock! Any damage caused by the non-observance of this operation manual excludes any warranty claims. The manufacturer is not
liable for any damage to property or for personal injury caused by improper handling or non-observance of the safety instructions.
- This device left the factory in perfect condition. To maintain this condition and to ensure a risk-free operation the user must observe the safety
instructions and warnings contained in this operation manual.
- Forreasonsofsafetyandcertication(CE)theunauthorisedconversionand/ormodicationofthedeviceisprohibited.Pleasenotethatin
theeventofdamagecausedbythemanualmodicationtothisdeviceanywarrantyclaimsareexcluded.
- The inside of the device does not contain any parts which require maintenance, with the exception of wear parts that can be exchanged from
theoutside.Qualiedstaffmustcarryoutmaintenance,otherwisethewarrantydoesnotapply!
- The fuse must exclusively be exchanged against fuses of the same class, with the same trigger features and nominal current rating.
- Ensure that the power will only be supplied after the device has been fully set up. Always plug in the mains plug last. Ensure that the mains
switch is in the “OFF” position when connecting the device to power.
- Only use cables that comply with regulations. Observe that all jacks and bushes are tightened and correctly hooked up. Refer to your dealer,
if you have any questions.
- Ensure that when setting up the product, the mains cable is not squashed or damaged by sharp edges.
- Preventthemainscablefromcomingintocontactwithothercables!Exercisegreatcarewhenhandlingmainscablesandconnections.Never
touchthesepartswithwethands!
- Connect the power cable exclusively to appropriate shock-proof outlets. The only supply point to be used is a supply outlet in accordance with
specicationsofthepublicsupplynetwork.
- Disconnectthedevicefromthesupplyoutletwhennotinuseandbeforecleaning!Besuretoholdthemainsplugbythebody.Neverpullthe
mainscord!
- Positionthedeviceonahorizontalandstablelow-amebase.
- Avoid any concussions or violent impact when installing or operating the device.
- When selecting the location of installation, make sure that the device is not exposed to excessive heat, humidity and dust. Be sure that no
cablesliearoundopenly.Youwillendangeryourownsafetyandthatofothers!
- Donotrestanycontainerslledwithliquidthatcouldeasilyspillontothedeviceorinitsimmediatevicinity.If,however,uidsshouldaccess
theinsideofthedevice,immediatelydisconnectthemainsplug.Havethedevicecheckedbyaqualiedservicetechnicianbeforere-use.
Damagecausedbyuidsinsidethedeviceisexcludedfromwarranty.
- Donotoperatethedeviceunderextremelyhot(inexcessof35°C)orextremelycold(below5°C)conditions.Keepthedeviceawayfrom
directexposuretothesunandheatsourcessuchasradiators,ovens,etc.(evenduringtransportinaclosedvehicle).Alwaysensuresufcient
ventilation.
- The device must not be operated after being taken from a cold environment into a warm environment. The condensation caused hereby may
destroyyourdevice.Donotswitchonoroperatethedeviceuntilithasreachedambienttemperature!
- Controls and switches should never be treated with spray-on cleaning agents and lubricants. This device should only be cleaned with a damp
cloth.Neverusesolventsorcleaninguidswithapetroleumbaseforcleaning.
- When relocating, the device should be transported in its original packaging.
- Whenstartingoperation,thecrossfadersandvolumecontrolsofyourampliermustbesettominimumlevel.Bringtheloudspeakerswitches
into the “OFF” position. Wait between 8 to 10 seconds before increasing the volume to avoid damage to loudspeakers and diplexer.
- Devices supplied by voltage should not be left in the hands of children. Please exercise particular care when in the presence of children.
- At commercial facilities the regulations for the prevention of accidents as stipulated by the organization of professional associations must be
observed.
- At schools, training facilities, hobby and self-help workshops the operation of the device must be monitored with responsibility by trained staff.
- Keepthisoperationmanualinasafeplaceforlaterreferenceintheeventofquestionsorproblems.
APPLICATION IN ACCORDANCE WITH REGULATIONS
- This device is a professional mixing console which can regulate and mix low level audio signals. The device is thereby connected between a
signalsourceandanaudioamplieroractivespeakers,respectively.
- This product is authorised for connection to AC100-240 V, 50/60 Hz and is designed exclusively for indoor application.
- If the device is used for any other purposes than those described in the operation manual, damage can be caused to the product, leading to
theexclusionofwarrantyrights.Moreover,anyotherapplicationthatdoesnotcomplywiththespeciedpurposeharboursriskssuchasshort
circuit,re,electricshock,etc.
- The serial number determined by the manufacturer must never be removed to uphold the warranty rights.
MAINTENANCE
- Check the technical safety of the device regularly for damage to the mains line or the casing, as well as for wear of wear parts such as rotary
and sliding switches.
- If it is to be assumed that the safe operation is no longer feasible, then the device must be disconnected and secured against accidental use.
Alwaysdisconnectthemainsplugfromtheoutlet!
- It must be assumed that a safe operation is no longer feasible, if the device bears visible defects, if the device no longer functions, following
longer storage under unfavourable conditions or after major transport stress.
IM_RMX90-DVS_en.indd 13 21.12.2016 09:47:58

Reloop RMX90DVS Specifications

General

Brand	Reloop
Model	RMX90DVS
Category	Music Mixer
Language	English