Need help?Do you have a question about the REMEHA Avanta 18v and is the answer not in the manual?
What to do if you smell gas, including turning off supply and evacuation.
What to do if you smell smoke or flue gases, including switching off and evacuation.
Requirements for boiler installation area, including frost-free and access to spur unit.
Information on factory settings and maximum water temperatures, and flue duct temperature.
Explains error codes that users can address, with specific examples like E1, E2, E7, E10, E4.
Covers error codes requiring professional intervention and general advice for other codes or water leaks.
Guide to changing the P1 setting for central heating water flow temperature.
Guide to changing the P2 setting for domestic hot water temperature.
Instructions for setting P3 for central heating and domestic hot water modes.
How to switch between Eco and Comfort modes using the P4 setting.
Steps to change the display setting to remain on or turn off automatically using P6.
How to disable the boiler with frost protection for extended non-use periods.
Steps to disable the boiler without frost protection for longer periods of non-use.
Advice on draining the system to prevent freezing damage during cold weather.
Details on registering the boiler and annual servicing requirements for warranty.
Remeha's commitment to providing a high-quality repair service via skilled engineers.
Guidance on contacting installers first and then customer service for issues.
Specifies what is covered under the warranty, including free repairs and replacements for manufacturing faults.
Lists items and situations not covered by the warranty, such as improper installation or consequential losses.
Importance of the Benchmark Checklist for installation, commissioning, servicing, and warranty.
To Next Page
General