Need help?Do you have a question about the REMEHA Avanta Plus 39c and is the answer not in the manual?
General| Boiler Type | Combi |
|---|---|
| ERP Rating | A |
| Fuel | Natural Gas |
| Warranty | 2 years |
| Mounting | Wall |
| DHW Output (kW) | 39.0 |
| Efficiency | 90.4% |
Introduces the Remeha Avanta Plus range of boilers.
Covers general safety rules, pictograms, and important warnings.
Guidance on dealing with gas, smoke, and temperature risks.
Explains the boiler's function and identifies its main parts.
Outlines various methods for controlling the boiler.
Details the intelligent boiler control unit.
Step-by-step guide for initiating boiler operation.
How to interpret display codes and read boiler parameters.
Instructions for adjusting the maximum water temperature for central heating.
How to change the maximum domestic hot water temperature.
Setting the boiler mode for central heating and domestic hot water.
How to select between Eco and Comfort modes for boiler operation.
Adjusting the anticipated current for thermostat response.
How to configure the display to be always on or automatically off.
Notes that some settings require an installer access code.
Identifies and explains error codes that users can fix.
Lists error codes necessitating professional installer intervention.
Procedure for adding water to maintain system pressure.
Steps to safely disable the boiler before topping up.
Detailed steps for using a filling loop to add water.
Final steps after topping up, including checking pressure and removing the filling loop.
Instructions for re-enabling the boiler after system topping up.
Steps to take before bleeding radiators.
How to remove air from radiators and the system.
Final steps after bleeding, including checking pressure and restarting the boiler.
Steps to take before draining radiators and the system.
How to drain the central heating system.
How to connect a hose to the lowest drainage valve.
Final steps after draining, closing valves and nipples.
How to disable the boiler for longer periods with frost protection.
Steps to disable the boiler without frost protection.
Advice on turning off the boiler's gas tap.
Recommends draining the boiler and system for long absences.
Ensures correct water pressure before enabling the boiler.
Steps for switching on the boiler and its start-up program.
How to set the room thermostat for automatic operation.
Guidance for dealing with error messages after enabling.
Importance of checking water pressure several times a year.
Advice on inspecting radiators for leaks and rust.
Performing full open/close cycles on valves to ensure smooth operation.
Instructions for cleaning the outside of the boiler with a damp cloth.
Suggestion to arrange a professional service contract for the boiler.
Practical advice for reducing energy consumption.
Guidance on setting room thermostats for optimal efficiency.
Information on connecting different types of thermostats.
How to connect an underfloor heating system.
Suitability of the boiler for use with solar panel systems.
Information on factory testing procedures for the boiler.
Details regarding EC certification and relevant directives.
To Next Page
