REMEHA Avanta Plus 28c - Page 144

27
12 APPENDICES
12.1 Remeha factory test
Before it leaves the factory, each Remeha Avanta Plus boiler
is optimally adjusted and tested for:
- electrical safety;
- CO2- adjustment;
- hot water function;
- water tightness;
- gas tightness;
- automation parameters.
12.2 EC regulations
The Remeha Avanta Plus is certified in accordance with the
requirements of the CE-marking directives. See also the CE
Declaration of Conformity.
53
6 EC DECLARATION
EC – DECLARATION OF CONFORMITY
Manufacturer : Remeha B.V.
Address : Kanaal Zuid 110
Town, Country
: Postbus 32, NL-7300 AA Apeldoorn
- hereby declares that the appliance(s) : Remeha Avanta Plus
comply / complies with the specifications of the following EEC directives:
EEG Directive: 90/396/EEG
applied standards:
(pr)EN 297(1994), 483(1999), 625(1995), 677(1998)
73/23/EEG
(pr)EN 50165(1997), 60335-1(1994)
92/42/EEG
89/336/EEG
EN 50165(1997), 55014-1(2000), 55014-2(1997)
EN 61000-3-2(2000), 61000-3-3(1995)
97/23/EG
(Art.3, sub 3)
Apeldoorn, July 2005
W.F. Tijhuis
Approval Manager