Remington MB6850 - Trimming the Nape of the Neck; Care and Maintenance; Tips for Best Results; Cleaning After Each Use

6
Trimming the nape of your neck
1. Remove the adjustable comb.
2. Use the ngers of one hand to lift the hair at the base of your head up o your neck.
3. Your index nger should be covering the roots of the hairs you are lifting to prevent
them from being accidentally cut.
4. Hold the trimmer to the base of your neck with the blade facing up. Move the
trimmer up the neck until it touches your index nger which is protecting the hair
roots.
5. Move your trimmer slowly and keep the hair roots at the base of your head out of the
way of the trimmer.
TIPS FOR BEST RESULTS
• Your beard, moustache or sideburn hair should be dry.
• Avoid applying lotions before use.
• If you are triming for the rst time, start with the adjustable comb set to its maximum
length position.
CARING FOR YOUR TRIMMER
Your beard trimmer is tted with high quality blades. To ensure long lasting
performance, clean the blades and trimmer regularly.
After each use
1. Ensure your trimmer is switched o and disconnected from the charger before
cleaning.
2. Remove the blade. Brush the accumulated hair from the blade.
3. Wipe your trimmer body with a damp cloth and dry immediately. Do not submerge
your trimmer in water.
4. Ret the blade.
5. Press the two vacuum chamber release buttons and remove the vacuum chamber
(Fig B).
6. Empty the vacuum chamber (Fig C) and rinse it under a running tap. Dry then ret
the chamber.
Washable heads
The trimming heads are washable for ease of cleaning. Always remove the trimming
head from your trimmer before washing.
1. Rinse the trimming heads under a running tap to remove any hair clippings (Fig D).
2. Once dry, ret the trimming head.