4
• Do not allow any part of the appliance touch the face, neck or scalp.
• During use, always ensure the inlet and outlet grilles are not blocked in any way as
this will cause the unit to automatically stop. If this should occur, switch o and allow
the unit to cool.
• Keep the power plug and cord away from heated surfaces.
• Do not leave the appliance unattended while plugged in.
• Do not place the appliance on any soft furnishings.
• Do not use attachments other than those we supply.
• Do not set the appliance down while still on.
• Do not twist or kink the cable, or wrap it round the appliance.
• Do not use the appliance if it is damaged or malfunctions.
• Check the cord regularly for any sign damage.
• This appliance is not intended for commercial or salon use.
PARTS
1. Heat settings switch
2. Speed settings switch
3. Cool shot
4. Style shot
5. Slim 7mm concentrator
6. Styling concentrator
7. Diuser
8. Removable easy clean rear grille
9. Hang up loop
10. Cord
INSTRUCTIONS FOR USE
1. Wash and condition your hair as normal.
2. Squeeze out excess moisture with a towel and comb through.
Hairsprays contain ammable material – do not use while using this product.
3. Attach the concentrators or diuser by tting it to the front of the hairdryer and
twisting clockwise to lock it.
4. Plug the product into the mains power supply.
5. Switch your hairdryer on and select the desired speed setting (low F or high E)
using the speed selector switch.
6. Select the desired heat setting (low N, medium O or high P) using the heat selector
switch.
7. After use, turn the appliance o and unplug it.
8. Let the appliance cool down before cleaning or storing away.
HOW TO CREATE LONGER-LASTING STYLES
• For best results, the style shot should only be used when the hair is 70-80% dry.
• The style shot works on all temperature and speed settings.
• Select the desired temperature and speed setting using the switches on the handle
as described above.
To Next Page
Loading...
