Remington PRO-Luxe AC9140 - Dryer Maintenance and Care; Cleaning and Filter Maintenance

5
• Dry your hair gently without sectioning until it is around 70-80% dry.
• Turn o the dryer and attach the styling concentrator. The 7mm may also be used.
• Section the hair.
• Ensure the style shot setting has been selected and turn the dryer on ( ).
Style Shot:
• Increases the dryer temperature and ensures the perfect amount of heat is applied
to the hair when styling.
• Using a hair brush, work on one section at a time.
• Turn the hairdryer on and run the concentrator down the hair until dry.
• When the section of hair is dry, select the cool setting ( ) and run the concentrator
down the hair again. This will help to set the style and achieve longer-lasting results.
TIPS
• For fast drying use the high heat / high speed setting.
• To create smooth styles use the concentrator and a round hair brush (not included)
whilst drying.
• To enhance natural curls and waves, attach the diuser to the dryer. Turn your head
upside down and gently place your hair into the diuser bowl slightly rotating the
dryer as you style.
• To create extra volume at the roots of the hair, keep your head upright and place the
diuser against the top of the head. Gently rotate the hairdryer allowing the diuser
ngers to gently massage the scalp being careful not to burn the scalp. Dry gently on
a medium heat / low speed setting.
Caution: Do not use the diuser on the highest heat setting (P).
• To set your style, press the cool shot button whilst styling.
CLEANING AND MAINTENANCE
• Unplug the appliance and allow to cool.
• Don’t use harsh or abrasive cleaning agents or solvents.
• To maintain peak product performance and to prolong motor life, it is important to
regularly remove any dust and dirt from the air lter grille.
• To remove the rear grille for cleaning hold the dryer handle in one hand, then with
the other place your thumb on the tab at the bottom of the grille. Push upwards to
ip the grill up and o the dryer.
• To replace the rear grill Hold in place with thumb and index nger hook the top into
the slot and click the bottom into place.