7
USER INSTRUCTIONS
This hair dryer is equipped with a thermostat that will cycle ‘OFF’ if the
temperature exceeds the comfort level due to partially blocked air inlet
or air outlet grilles. In the event that the hair dryer stops during use, turn
off all switches and allow the hair dryer to cool down, at which time the
thermostat will automatically reset. Before using again, check that the air
inlet and air outlet grilles are not blocked. Unplug the hair dryer and clean
the openings if necessary. During use, do not block the air openings or let
your hair be drawn into the hair dryer.
MAINTENANCE
Your hair dryer is designed for household use and is virtually maintenance
free. When cleaning becomes necessary, turn all switches off and
disconnect the hair dryer from the power outlet.
To maintain peak product performance, it is important to clean the air inlet
grille and filter at the back of the dryer. To access the air inlet grille and
filter, grasp the latch on the air inlet grille retaining ring with your hand
and pull it away from the hair dryer. The filter can now be cleaned with a
soft brush or a vacuum cleaner. Take the air inlet grille retaining ring and
position it so the lugs are aligned with the notches on the side of the dryer.
To lock, push the air inlet grille retaining ring into place. The exterior of the
hair dryer can be cleaned by wiping it with a damp cloth.
STORAGE
When not in use, unplug the unit. Allow the appliance to cool and store
out of reach of children in a safe, dry location. Never wrap the cord
around the appliance as this will cause the cord to wear prematurely and
break. Handle the cord carefully for long life and avoid jerking, twisting or
straining especially at plug connections. If the cord becomes twisted in use,
periodically straighten it.
You may also use the hang loop to store the hair dryer within convenient
reach, ensuring that water cannot be splashed on to it when it is hung up.
To Next Page
Loading...
