Remington RM1035P - User Manual

769-11882 / 02 07/17
Operator’s Manual
RM1035P
Electric Chain Saw / Pole Saw
IMPORTANT: Read this manual thoroughly before using this product. Follow all instructions.
SAVE THESE INSTRUCTIONS
ORIGINAL INSTRUCTIONS

Summary

Service and Warranty Information

Safety Information and Symbols

Explains the meaning of Danger, Warning, Caution, and Note symbols.

California Proposition 65 Warning

Alerts about potential cancer and reproductive harm risks from product chemicals.

Important Safety Instructions

General Power Tool Safety

Comprehensive safety guidelines for power tool operation.

Chain Saw Specific Safety

Safety advice specific to operating chain saws.

General Safety Precautions

Kickback Prevention and Causes

Explains kickback mechanisms and preventive measures.

Electric Unit Safety Warnings

Environmental Hazards

Warnings about operating in wet conditions or explosive atmospheres.

Extension Cord Safety

Guidelines for selecting and using appropriate outdoor extension cords.

Cord Condition and Handling

Importance of inspecting and properly handling power and extension cords.

GFCI Protection

Requirement for Ground Fault Circuit Interrupter (GFCI) protection.

Double Insulation

Explanation of double insulation and servicing requirements.

Operating Precautions

Safety measures during operation, including PPE and tool usage.

Kickback Safety

Kickback Safety Precautions

Steps to reduce accident and injury from kickback.

Chain Saw Operation Precautions

Specific safety for chain saw use, including grip and cutting height.

Pole Saw Operation Precautions

Specific safety for pole saw use, including arm extension.

Unit Maintenance and Cleaning

Importance of keeping the unit clean and properly maintained.

Operational Hazards

Warnings about cutting near power lines, falling debris, and spring poles.

Unit Classification and Intended Use

Classification of the saw and its intended use for homeowners.

Other Safety Warnings

Unit Maintenance and Care

Instructions for maintaining and servicing the unit.

Safety Device Integrity

Ensuring safety devices are not removed or modified.

Pre-Operation Checks

Steps to take before inspecting, maintaining, cleaning, or storing the unit.

Storage and Handling

Proper procedures for securing, storing, and handling the unit.

Safety and International Symbols

Safety Alert Symbol

Indicates danger, warning, or caution, used with other symbols.

Read Operators Manual

Instruction to read and follow manual for safety.

Wear Head, Eye and Hearing Protection

Warning to wear appropriate PPE for protection from hazards.

Do Not Use in the Rain

Warning against operating the unit in wet conditions due to shock hazard.

Double Insulated Symbol

Indicates two systems of insulation instead of grounding.

Keep Bystanders Away

Warning to keep bystanders at a safe distance from the operating area.

Power Lines Danger

DANGER warning about operating near power lines.

On;Off Stop Control

Explanation of the ON/START/RUN and OFF/STOP controls.

Use Both Hands

Warning to always use both hands for unit operation.

Kickback Warning

Warning about kickback from guide bar tip contact.

Chain Oil

Importance of checking and maintaining chain oil level.

Chain Direction

Ensuring the saw chain is installed in the correct direction.

Damaged Cords

Instructions for handling damaged power cords.

Electrical Specifications

Explanation of symbols for Volts, Amperes, Hertz, and AC.

Know Your Unit Components

Chain Saw Applications

Lists uses for the unit as a chain saw: felling, limbing, bucking, pruning.

Chain Saw Parts Identification

Diagram and labels identifying key parts of the chain saw configuration.

Pole Saw Applications

Pole Saw Components Identification

Diagram and labels identifying key parts of the pole saw configuration.

Essential Terms and Definitions

Chain Saw and Powerhead Definitions

Defines terms related to the chain saw and its main components.

Handle and Guard Definitions

Defines terms for handles, guards, and related parts.

Guide Bar and Chain Definitions

Defines terms for guide bar, saw chain, and kickback reduction.

Control and Assembly Definitions

Defines terms for controls, linkages, and assembly components.

Pole Assembly Definitions

Defines terms for pole assembly, shafts, and levers.

Kickback and Cutting Definitions

Defines kickback types and cutting processes like felling, bucking, limbing.

Product Specifications

Unit Specifications

Technical details including motor, voltage, amperage, lubrication, and weight.

Replacement Parts

Lists part numbers and descriptions for replacement saw chain and guide bar.

Assembly Instructions

Assembly Warnings

Safety warnings to follow before assembling or disassembling the unit.

Unit Configuration Options

Explains how to assemble the unit as a chain saw or pole saw.

Assembling as a Pole Saw

Step-by-step guide for connecting motor and handle assemblies to the pole.

Assembling as a Chain Saw

Step-by-step guide for connecting motor and handle assemblies.

Connecting and Disconnecting Power

Connecting to Power

Steps for connecting the unit to an extension cord and power outlet.

Disconnecting from Power

Steps for safely disconnecting the unit from the power source.

Starting and Stopping the Unit

Starting and Stopping Warnings

Safety warnings before starting and during operation.

Before Starting the Unit

Preparation steps before starting the unit, including oil and power connection.

Starting Instructions

Step-by-step guide on how to start the unit using the trigger lockout.

Stopping Instructions

Procedure for stopping the unit by releasing the trigger.

Operation Guidelines

Operation Warnings

Warnings regarding wet conditions, chain tension, oil levels, and PPE.

Tips for Best Results

Advice for optimal cutting performance and usage.

Preparing the Work Area

Steps to prepare the work area for safe operation.

Holding the Unit

Instructions on proper grip and hand placement for chain saw and pole saw.

Cutting Procedure Basics

Steps for performing basic cuts, including starting, pressure, and finishing.

Felling Safety Precautions

General Felling Safety

Safety measures to reduce risk during tree felling operations.

Felling Procedure Overview

Describes the process for felling small and large trees.

Removing Buttress Roots

Steps for removing buttress roots before felling.

Making the Notched Undercut

Detailed steps for making the initial notched undercut for felling.

Making the Felling Back Cut

Limbing Procedure

Limbing Safety Warnings

Warnings about cutting limbs above shoulder height and falling branches.

Limbing Process

Steps for removing branches from a fallen tree.

Bucking Safety Precautions

General Bucking Safety

Safety measures to reduce risk during bucking operations.

Bucking Procedure Overview

Describes procedures for cutting logs under stress and fully supported.

Cutting Logs Under Stress

Steps for cutting logs that are bent due to support, preventing pinching.

Cutting Fully-Supported Logs

Steps for cutting logs supported along their entire length.

Overbucking Procedure

Underbucking Procedure

Pruning Procedure

Pruning Safety Warnings

Warnings about cutting above shoulder height and falling branches.

Pruning Steps

Detailed steps for removing limbs and limb stubs from living trees.

Maintenance Schedule and Responsibility

Maintenance Warnings

Warnings about performing maintenance while unit is running or hot.

Maintenance Schedule

Table outlining required maintenance tasks and their frequency.

Customer Responsibility

Defines user responsibilities for maintenance and part replacement.

Adding Bar and Chain Oil

Instructions for filling the chain oil reservoir, including warnings.

Checking Chain Oil Level

Procedure for checking the oil level using the level window.

Filling Chain Oil Reservoir

Steps for cleaning the cap area and filling the reservoir without overfilling.

Adjusting Chain Tension

Chain Tension Warnings

Warnings about chain sharpness, proper tension, and handling sharp chains.

Chain Tension Adjustment Procedure

Step-by-step guide to adjust chain tension using the bar knob and ring.

Correct vs. Incorrect Tension

Illustrations showing proper and improper chain tension.

Guide Bar and Saw Chain Removal;Installation

Replacement Warnings

Warnings about using low-kickback chains and manufacturer-specified parts.

Removing Guide Bar and Saw Chain

Steps for removing the bar cover, saw chain, and guide bar.

Installing Guide Bar and Saw Chain

Steps for installing the guide bar, saw chain, and bar cover.

Maintaining the Saw Chain

Saw Chain Warnings

Warnings about chain sharpness and potential damage from dull chains.

Saw Chain Maintenance

Importance of maintaining chain sharpness and indications of a dull chain.

Maintaining the Guide Bar

Guide Bar Maintenance

Instructions for rotating, cleaning, and inspecting the guide bar.

Replacing Guide Bar and Saw Chain

Replacement Warnings

Warnings about using low-kickback chains and manufacturer-specified parts.

Cleaning and Storage

Cleaning Warnings

Warnings about cleaning the unit safely and avoiding liquids or harsh cleaners.

Cleaning Procedure

Steps for cleaning the unit, including adjusting chain tension and wiping.

Storage Instructions

Guidelines for proper storage, including loosening chain and securing unit.

Troubleshooting Guide

Motor Will Not Start

Solutions for motor not starting, including connection and trigger issues.

Motor Lacks Power or Stalls

Solutions for motor power issues, such as inadequate extension cord size.

Saw Chain Comes Off Guide Bar

Solutions for chain coming off, such as loose tension or incorrect assembly.

Guide Bar and Saw Chain Running Hot, Smoking or Stuck

Solutions for overheating or binding, like chain tension and oil levels.

Saw Chain Does Not Rotate

Solutions for chain not rotating, including tension, assembly, and damage.

Saw Chain Rotates, But Does Not Cut

Solutions for the chain rotating but not cutting, like dullness or backward installation.

Manufacturers Limited Warranty

Warranty Coverage and Limitations

Details on warranty period, coverage, exclusions, and limitations.

Obtaining Warranty Service

Instructions on how to obtain service and locate authorized dealers.

State Law and Liability

Information on how state law affects warranty rights and liability.

Remington RM1035P Specifications

General

Brand	Remington
Model	RM1035P
Category	Pole Saw
Language	English