EasyManua.ls Logo

REMIS REMIcare Van - Step 4: Adjusting the String Tension; Adjust String Tension; Check Handle Bar Alignment

Default Icon
20 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13/20
A21
A21:
Use a small 1.5mm Allen screw here, too, to loosen the grub screw from
inside the string stretcher. Pull the string stretcher towards the handle
bar to stretch the string more and into the opposite direction to loosen
the strings. Now pull the grub screw tight again.
Please do not tighten the string too much, this can lead to a tear in the
string, which will void the warranty on the product.
A22
UL
UR
OL
OR
US/GB
A22:
Make sure the handle bar is running parallel to the coffer prole or the
door sealing.
Note: When stretching or loosening the handle bar is adjusted in the
following direction:
Attention: Pretention must not be too strong since operating will be
too stiff and, in the worst case, the string may tear!
String stretcher
Pulling
Loosening
Direction
Top
X
UR
Top
X
UL
Buttom
X
OR
Buttom
X
OL

Related product manuals