Issue: 34/2005 We reserve the right to make changes Page 1/5
User information
REMIfrontII-S
Mercedes Sprinter
From production year 2000
Driver's cab blind system
for Mercedes Sprinter
Important!
Read this information carefully first.
This system is not suitable for vehicles with
airbags in the A pillars or above the doors!
Contents:
A. Product information
B. Assembly information
C. Operating information
D. Repair and maintenance
A. Product information
1. Manufacturer: REMIS GmbH
Mathias-Brüggen-Str. 67-69
D-50829 Köln
2. Designation and Type: REMIfrontII-S – Cab blind system, Mercedes Sprinter
3. Status, Date of manufacture: see sticker
4. Possible uses: Motor caravans based on the Mercedes Sprinter as from 2000 (vehicles
without airbags above the a pillar or above the doors)
5. Installation: see B. (Assembly information)
6. Function description: see C. (Operating information)
7. Variants: 2-part vertical blind system for front windscreen and vertical blind
systems in frames for the side windows.
High degree of shade through use of almost completely opaque pleated
material.
8. Warning: The blinds may only be closed when the vehicle is stationary and the
engine is switched off. Before starting the journey the system must be
completely folded down and locked. Note, the handles can remain hot for
lon
eriods if ex
osed to stron
sunli
ht.
The system is not intended for shading the vehicle over long periods
(e.g. over the winter). Depending on the temperature, the material may
be temporarily more difficult to fold back.
To Next Page
Need help?
General
