QXBIUDB*T[G 3DJH
MEGANE CABRIOLET NU 640-2
C:\Documentum\Checkout\nu640-2_eng_T1.WIN 24/2/2001 14:26
-page54
1.48
EXTERNAL LIGHTING AND SIGNALS
Side lights
Turn th e e n d of s t a lk 1 to
align with mark 3 opposite the
symbol.
The instrument panel will
illuminate. The intensity may be
adjusted by turning tumblewheel 2,
if the vehicle is equipped with this
facility.
Headlight dipped beams
Turn th e e n d of s t a lk 1 to
align mark 3 opposite the symbol.
A tell-tale light will illuminate on
the instrument panel.
Headlight main beams
With stalk 1 in the dipped
headlight position, pull the stalk
towards you.
When the main beam headlights are
illuminated, a tell-tale light is
illuminated on the instrument
panel.
To return to the dipped headlight
position, pull the stalk towards you
again.
Switching off the lights
Turn t he end of stal k 1 back
to its original position.
“Lights on” warning buzzer
A warning buzzer will sound when
the driver’s door is opened and the
lights are left switched on after the
ignition has been switched off (to
prevent discharge of the battery).
Before driving at night,
check that the electrical
equipment is in good
condition and adjust the
headlight beams (if your vehicle
is not carrying its normal load).
To Next Page
Loading...
