Renault LAGUNA 2000 User Manual

General
SPECIFICATIONS
LIFTING
TOWING
LUBRICANTS AND CONSUMABLES
OIL CHANGE AND ENGINE OIL
REFILLING
VALUES AND SETTINGS
BG0A - BG0B - BG0D - BG0G - KG0A - KG0B - KG0D - KG04
77 11 297 322
"The repair methods given by the manufacturer in this document are based on the
technical specifications current when it was prepared.
The methods may be modified as a result of changes introduced by the manufacturer
in the production of the various component units and accessories from which his
vehicles are constructed."
NOVEMBER 2000
All copyrights reserved by Renault.
EDITION ANGLAISE
Copying or translating, in part or in full, of this document or use of the service part
reference numbering system is forbidden without the prior written authority of Renault.
© RENAULT

Renault LAGUNA 2000 Specifications

General

Brand	Renault
Model	LAGUNA 2000
Category	Automobile
Language	English

Summary

01 SPECIFICATIONS

Engine - Clutch - Gearbox

Details engine types, capacities, clutch types, and gearbox types for various vehicle models.

02 LIFTING

Trolley jack - Axle stands

Provides instructions and safety precautions for using trolley jacks and axle stands.

Underbody lifts

Details procedures and safety advice for using underbody lifts.

Removing and refitting heavy components

Safety warning and procedure for using straps when removing heavy components with a two-post lift.

Fitting the safety straps

Step-by-step guide on how to correctly fit safety straps for lifting operations.

03 TOWING

All types

Instructions and warnings regarding vehicle towing procedures and attachment points.

05 OIL CHANGE AND ENGINE OIL REFILLING

Engine

Details draining and filling procedures for the engine oil.

Gearbox

Provides procedures for changing and refilling gearbox oil for manual and automatic transmissions.

07 VALUES AND SETTINGS

Procedure for tensioning the timing belt (F9Q engine)

Detailed steps for tensioning the timing belt on the F9Q engine.

Procedure for tensioning the timing belt (K4M engine)

Step-by-step guide for setting and tensioning the timing belt on the K4M engine.

Procedure for tensioning the timing belt (F4P engine)

Instructions for adjusting the timing belt tension on the F4P engine.

Tightening the cylinder head (F4P-K4M Engines)

Procedure for tightening cylinder head bolts for F4P and K4M engines.

Tightening the cylinder head (F9Q engine)

Procedure for tightening cylinder head bolts for the F9Q engine.

Tightening the cylinder head (L7X Engine)

Procedure for tightening cylinder head bolts for the L7X engine.

Brakes

Details disc thicknesses, lining thicknesses, and brake fluid types.

Front axle angle checking values (BG0A with 15" tyres)

Front axle angle checking values (BG0B with 15" tyres)

Front axle angle checking values (BG0R with 15" tyres)

Front axle angle checking values (BG0A with 16" tyres)

Front axle angle checking values (BG0B with 16" tyres)

Front axle angle checking values (BG0R, BG0G with 16" tyres)

Front axle angle checking values (BG0D with 16" tyres)

Front axle angle checking values (BG0A, BG0B with 17" tyres)

Front axle angle checking values (BG0G with 17" tyres)

Front axle angle checking values (BG0R with 17" tyres)

Front axle angle checking values (BG0D with 17" tyres)

Front axle angle checking values (KG0A with 16" tyres)

Front axle angle checking values (KG0B with 16" tyres)

Front axle angle checking values (KG0R, KG0G with 16" tyres)

Front axle angle checking values (KG0D with 16" tyres)

Front axle angle checking values (KG0A, KG0B with 17" tyres)

Front axle angle checking values (KG0G with 17" tyres)

Front axle angle checking values (KG0R with 17" tyres)

Front axle angle checking values (KG0D with 17" tyres)

Rear axle angles checking values