98CUP_2013 Release
C-20
B.6.3.4
Alarms displayed on the dashboard
Alarms are generated by the ICD depending on engine / gearbox sensors values sent by
the ECU for display.
The alarm/default message disappears only when the problem is solved. Even if the
problem is solved, till the power supply is ON :
- The top left and/or right LEds alarms remain ON
- The letter in the area “event” is displayed
We distinguish 2 categories of alarms : A and B
B.6.3.4.1 M
AIN ALARMS
(C
ATEGORY
A)
The following alarms are displayed to the driver, meaning that he must immediately
stop the car and cut the engine.
o Water T max
o Oil P min
o Vbatt min
See List on next page with the corresponding thresholds.
A message is displayed on the full screen on the dashboard + in the Area ‘Default” to
force the driver to stop
In addition with the message displayed, all the following LEDs become RED:
- 3 on the Right column (above gearbox diagnostic LED)
- 3 on the Left column (above engine diagnostic LED)
+ 1 engine alarm LED in RED
To Next Page