18BBIUDB*T[G 3DJH
CLIO nu665-3
C:\Documentum\Checkout\nu665-3_eng_T3.WIN 17/8/2001 11:48
-page7
3.07
HEATING - VENTILATION - AIR CONDITIONING (continued)
• Position
The air flow is distributed between
the dashboard vents and the
footwells.
Close the dashboard vents to direct
all the air to the footwells.
• Position
The air flow is distributed between
all the air vents, the front side
window demisting air vents, the
windscreen demisting vents and the
footwells.
• Position
Close the dashboard vents for more
effective demisting.
All the air is directed to the
windscreen and front side window
demisting vents.
For maximum efficiency, set control
C to 4.
Adjusting the amount of
air blown into the
passenger compartment
Ventilation
Move control C from 0 to 4.
Passenger compartment ventilation
is by “blown air”. The blower
determines how much air enters but
car speed has some effect on this.
The further the control is moved to
the left, the greater the amount of air
supplied.
If you want to fully close the inlet
and stop the ventilation unit, set
control C to 0.