Renault clio 2001 - Bonnet; Opening the Bonnet

1
3
4
5
2
2
18BBIUDB*T[G    3DJH 
CLIO nu665-3
C:\Documentum\Checkout\nu665-3_eng_T4.WIN 6/9/2001 20:50
-page2
4.02
BONNET
Opening the bonnet
To open the bonnet, pull handle 1.
Check that the bonnet is
correctly locked.
Take care when working
under the bonnet as the
engine cooling fan may
startupatanymoment.
Bonnet safety lock
To unlock, lift catch 2.
Any operation on or
modification to the fuel
supply system (computers,
wiring, fuel circuit,
injector, protective covers...) is
strictly forbidden due to the
safety risks it may entail (except
for qualified staff from the
Renault network).
Lift the bonnet, release the stay 4
from its clip 5 and, for your own
safety, locate it in its retaining slot 3.
Closing the bonnet
To close the bonnet, replace the
stay 4 in its retaining clip 3,gripthe
bonnet in the middle and lower it
down to 8 inches (20 cm) above the
closed position. Then release it. It
will lock automatically under its
own weight.
Check that the bonnet is correctly
locked.
Before closing the bonnet, check to
make sure that nothing has been left
in the engine compartment.