Renault Clio 2007 - Tool kit (Jack - Wheelbrace - Wheel wrench, etc.)

anneaux de remorquage .......................... (jusqu’à la fin de l’UD)
bloc-outils ................................................. (jusqu’à la fin de l’UD)
clé d’enjoliveur .......................................... (jusqu’à la fin de l’UD)
crevaison .................................................. (jusqu’à la fin de l’UD)
levage du véhicule
Changement de roue .......................... (jusqu’à la fin de l’UD)
manivelle .................................................. (jusqu’à la fin de l’UD)
cric ............................................................ (jusqu’à la fin de l’UD)
clé de roue ................................................ (jusqu’à la fin de l’UD)
5.3
ENG_UD4198_2
Bloc outils (S65 - B65 - C65 - Renault)ENG_NU_778-2_NU_Renault_5
Bloc outils (Cric - Manivelle - Clés de roue, etc.)
TOOL KIT
Tool kit 1 is located in the emergency
spare wheel. It consists of a set of tools
for various operations on the vehicle:
jack, wheelbrace, towing hitch, etc. and
a space for a bulb unit.
Hubcap tool 2
It is used to remove the hubcaps.
Towing hitch 3
To find out how it should be used
see the information on “Towing” in
Section 5.
Jack 4
When refitting the jack, fold it com-
pletely and replace it in its location.
Wheelbrace 5
Wheelbrace 6
This is used to tighten or release the
wheel bolts.
The jack is designed for
wheel changing purposes
only. It should never be
used for repairs or gaining
access to the underneath of the
vehicle.
1
5
4
3
2
6