This function allows you to change the
format of coordinate.
Tap 3 to change the format of coordi-
nate.
This system will offer 3 types of format.
Refer to the information in the section
on “Map settings”.
This function allows you to change the
language of voice guidance.
It enables or disables the use of roads
which are situated in not publicly acces-
sible areas.
If it is disabled and the Start and
Destination waypoints are in the same
country, then the roads that are outside
of the country are disabled.
permit needed and border cross-
ing options are available only if the cor-
responding segments are included in
the planned route.
Coordinate Format
Navigation
Warnings Route Settings Map Settings
Voice Settings Coordinate
Format
GPS
Destination Route Options
To Next Page
Loading...
