Renault Clio - Wheel Trim, Wheel

hubcap tool ................................................
(up to the end of the DU)
trims ...........................................................
(up to the end of the DU)
5.8
ENG_UD58931_2
Enjoliveur - Roue (XJA - Renault)
Remove the wheel trim using hubcap
tool 1 (located in the tool kit) by en-
gaging the hook in the opening near
valve 2.
To refit it, align it with valve 2. Push the
retaining hooks in fully, starting with
side A near the valve, followed by B
and C, finishing at D opposite the valve.
Wheel trim, wheel
WHEEL TRIM, WHEEL
Do not leave the tools un-
secured inside the vehicle
as they may come loose
under braking. After use,
check that all the tools are correctly
clipped into the tool kit, then posi-
tion it correctly in its housing: risk of
injury.
1
2
A
B
D
C