2.32
ENG_UD73030_2
Limiteur de vitesse (XJK - Renault)
SPEED LIMITER (3/3)
Recalling the limit speed
If a speed has been stored, it can be
recalled by pressing switch 2 (RES/+).
Putting the function on
standby
The speed limiter function is sus-
pended when you press switch 4 (0).
The limit speed remains stored and,
depending on the vehicle, the message
“Memorised XXX mph (XXX km/h)” ap-
pears on the instrument panel accom-
panied by the stored speed.
Switching off the function
The speed limiter function is deac-
tivated if you press switch 1: in this
case a speed is no longer stored. The
orange instrument panel warning light
goes out, confirming that the func-
tion is stopped.
When the speed limiter is set to
standby, pressing switch 3 (SET/-)
reactivates the function without
taking into account the memorised
speed: it is the speed at which the
vehicle is moving that is taken into
account.
2
4
1
3
To Next Page
Loading...
