CHILD SAFETY
2
The seat belt must nev-
er be twisted or the
tension relieved. Never
pass the shoulder strap
under the arm or behind the
back. Check that the seat belt
has not been damaged by
sharp edges. If the seat belt
does not operate normally, it
will not protect the child. Con-
sult an approved dealer. Do not
use this seat until the seat belt
has been repaired.
Attachment using isofix system
Authorised ISOFIX child seats are
approved in accordance with regu-
lation ECE-R44 in one of the three
following cases
– ISOFIX universal 3-point forward-
facing seat
– ISOFIX semi-universal 2-point
seat;.
– specific.
For the latter two, check that your
child seat can be installed by con-
sulting the list of compatible vehi-
cles.
Attach the child seat with the ISOFIX
locks, if these are provided. The
ISOFIX system allows quick, easy,
safe fitting. The ISOFIX system con-
sists of 2 rings and, in some cases, a
third ring.
The two rings
1
and
2
are located
between the seatback and the seat
base of the seat and are identified
by a marking.
Before installing an ISOFIX seat in
the rear at the side, please ensure
that you have retracted the seat belt
buckle
3
between the seatback and
the seat base to give access to the
lock
1
. Make sure that the seat is cor-
rectly fitted to the locks
1
and
2
.
|
52 - Getting to know your vehicle
To Next Page