HEADLIGHT BEAM ADJUSTMENT
2
Knob
A
is used to adjust height of
the headlight beam according to
load. Turn knob
A
anticlockwise to
lower the beams and clockwise to
raise them.
Vehicles with LED:
Examples of posi-
tions for adjusting
the knob
A
accord-
ing to the load
Only Driver Zero
Driver +
front pas-
senger
Zero
Driver + Pas-
senger in
o
front seat +
Rear seats
occupied
Driver + Lug-
gage in boot
o
Passenger
in all seats
oo
Passenger
in all seats +
Luggage in
boot
ooo
Vehicles with halogen bulb:
Examples of posi-
tions for adjusting
the knob
A
accord-
ing to the load
Only Driver Zero
Driver +
front pas-
senger
Zero
Driver + Pas-
senger in
front seat +
Rear seats
occupied
o
Driver + Lug-
gage in boot
o
Passenger
in all seats
oo
Passenger
in all seats +
Luggage in
boot
oo
Temporary adjustment
Open the bonnet and identify the
marking
B
next to one of the front
headlight projectors.
For each headlight, use a screwdriv-
er to turn the screw
1
a quarter of a
turn towards the "D" symbol to lower
the beams.
|
82 - Getting to know your vehicle
To Next Page