Renault KIGER 2025 - Windscreen Washing; Wiping; Windscreen Wiper

WINDSCREEN WASHING / WIPING
2
Windscreen Wiper
With the ignition on, move the
stalk 1 around the steering wheel
(depending on the version):
A. One time Mist removal function.
B. Park;
C. Intermittent wiping (depends on
vehicle version) - The wiper will
pause for several seconds between
sweeps.
D. Normal wiping speed.
E. Fast wiping speed.
Windscreen washer
With the ignition on, pull the
stalk 1 towards you.
A brief pull will trigger a single sweep
of the wipers, in addition to the wind-
screen washer.
A longer pull will trigger three
sweeps of the wipers, in addition to
the windscreen washer.
When working in the
engine compartment,
ensure that the wind-
screen wiper stalk 1 is
in the B position (park). Risk of
injury.
In frosty weather, make
sure that the wiper blades
are not stuck by ice (risk
of motor overheating).
Keep an eye on the condition of
the blades. They should be re-
placed as soon as they become
less efficient.
This will occur approximately
once a year. Clean your wind-
screen regularly.
If you switch off the ignition be-
fore switching off the wind-
screen wiper (position A) the
blades will stop at random on
the windscreen.
After switching the ignition
back on, simply move stalk 1 to
position B to place them in the
park position.
Before any action on
the windscreen (wash-
ing the vehicle, de-ic-
ing, cleaning the wind-
screen, etc.), return stalk 1 to po-
sition B (park).
Risk of injury and/or damage.
Getting to know your vehicle - 85
|